1: Choose camera location, usually side or top and select either the curved or flat tray mount to suit. Use the laser pointer to help align the camera, (it may help to have someone assist).
2: Clean the area with soapy water and allow to dry
3: If possible warm the adhesive pad in your hand, remove adhesive backing from the camera mount and place firmly on the helmet, without the camera on.
4: Leave the mount to bond. Recommended bond time is 12 hours.
5: Repeat the process if also attaching the additional battery pack to your helmet.
6: Use the vented helmet or goggle mount or if required (Sold separately).
Handle bar mount
1: Use the supplied handle bar mount.
The tray mounts can be fixed to the framework, please note that the area will need to ne vibration free so fairings may not have enough rigidity; this can seriously affect the video quality and camera life. For more mounting options please contact our sales team who have access to a wide range of aftermarket fittings.
Hard wire kit
We recommend that you have the camera hard wired by an approved motorcycle auto electrician.
If self-fitting: Please refer to your Motorcycles wiring diagram, (We cannot offer advice on how to wire the kit)
Black – Neutral
Red – Permanent live
Blue – Switched live